 |
| Parallel Lap Belts |
The Parallel Lap Belt attaches directly to the floor track or plates and provides an occupant restraint system that secures the passenger separately and independently from the wheelchair securement system. |  |
|
|
|
|
|
|
|
|
Premium Lap Belts
|
| Each Premium Lap Belt contains three push-button buckles for greater versatility of attachment, two web adjusters for increased placement capability and web stiffeners for ease of installation.
|
|
|
Part No. FE200600
|
For Series L Track - 108" long
|
|
|
|
|
|
|
Part No. FE200612
|
For Series A Track - 108" long
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard Lap Belts
|
| Each Standard Lap Belt contains a single push-button buckle and two web adjusters for increased placement capability.
|
|
|
Part No. FE200594
|
For Series L Track - 98" long
|
|
|
|
|
|
|
Part No. FE200601
|
For Series A Track - 98" long
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Integrated Lap Belts |
The Integrated Lap Belt attaches directly to the rear tie-down assemblies of the wheelchair securement system. It provides an occupant restraint system that is an "integrated" part of the wheelchair securement and is dependent upon the strength of the wheelchair securement system for its restraint capability. |  |
|
|
|
|
|
|
|
|
Integrated Lap Belts
|
| Each Integrated Lap Belt contains a single push-button buckle, webbing adjuster(s) and web stiffeners for ease of installation. For use with the FF600 and FE500 Series Securement Systems only.
|
|
|
Part No. FE200842
|
96" Long
|
|
|
FF600 Series Systems with two webbing adjusters. |
|
|
|
|
|
Part No. FE200595
|
80" long
|
|
|
FE500 Series Systems only
With one webbing adjuster. |
|
|
|
|
|
|
|
|
|
|
|
Lap Belt Extensions
|
| The Lap Belt Extension contains a single push-button buckle.
|
|
|
Part No. FE200637
|
12" long
|
|
|
|
|
|
|
Part No. FE200637-020
|
20" long
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Integrated Combination Belts |
The FE200727 Integrated Combination Belt provides a shoulder belt and integrated lap belt that are incorporated into a fully retractable unit. It combines the automatic adjustability of a retractable shoulder belt with the easy installation of an integrated lap belt. Since the Integrated Combination Belt retracts to the vehicle sidewall, there is no need to provide
separate storage for the occupant restraint belts. A Velcro® strap is provided to keep the belt ends up against the
vehicle sidewall when not in use. The FE200727 is for use with the FE500 and FF600 Series Wheelchair Securement Systems only.
The retractor mechanism can be mounted directly to the vehicle floor or sidewall, or into Series L Aluminum Track with
the use of two FE200747 Series L Mounting Kits. The belt web guide can be installed to the vehicle sidewall by using
the FE200745 Sidewall Mounting Kit, or into Series L Aluminum Track with the FE200747 Series L Mounting Kit. |  |
|
|
|
|
|
|
|
| Part No. FE200856 |
|
|
|
 |
The FE200856 Integrated Combination Belt provides the same great features and benefits as our FE200727. The belt is designed to allow the retractor to be installed on a side rail, which is typically mounted 10 inches above the vehicle floor.
|
|
|
|
|
|
Integrated Combination Belt with Patented Height Adjuster
|
| The FE 200727 Integrated Combination Belt with Patented Height Adjuster provides a shoulder belt and integrated lap belt, which are incorporated into a fully retractable unit. The simple, easy-to-use Height Adjuster provides nearly 12 inches of vertical adjustment and allows for the proper geometry and placement of the shoulder belt, regardless of passenger size or wheelchair design.
|
|
|
|
|
Part No. FE200856HA
|
|
|
|
The FE200856HA Integrated Combination Belt provides the same great features and benefits as our FE200727HA. The belt is designed to allow the retraktor to be installed on a sidewall rail, which is typically mounted 10 inches above the vehicle floor. |
|
|
|
|
|
|
|
|
|
|
|
Dual Retractable Integrated Combination Belt
|
| The FE200868-2 Integrated Combination Belt provides unsurpassed flexibility and ease of use. The height of the belt can be adjusted for a perfect fit on the occupant simply by pushing a release button of the upper retractor. In addition to this feature, this belt can be moved front to back along the vehicle sidewall, without the use of tools, by simply removing the quick release L Fittings from the vehicle L Tracks. Not: Series L Track must be installed running front-to-back on the vehicle floor and on the upper section of the vehicle sidewall.
|
|
|
|
|
|
|
|
|
Non-Retractable
|
| The Non-Retractable Shoulder Belts are easily attached to a section of track mounted on the vehicle sidewall. This provides increased positioning flexibility for multiple station vehicles. Note: Recommended for passengers with limited upper body control.
|
|
|
Part No. FE200599
|
For Series L Track - 52" long
|
|
|
|
|
|
|
Part No. FE200732
|
For Series L Track - 82" long
|
|
|
|
|
|
|
Part No. FE200613
|
For Series A Track - 52" long
|
|
|
|
|
|
|
Part No. FE200716
|
For Series A Track - 82" long
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-Retractable with Patented Height Adjuster
|
| The FE200599HA Series L Non-Retractable Shoulder Belt is easily attached to a section of Series L Track mounted on the vehicle sidewall. This provides increased positioning flexibility for multiple station vehicles. The simple, easy-to-use Patented Height Adjuster provides nearly 12 inches of vertical adjustment and allows for the proper geometry and placement of the Shoulder Belt, regardless of passenger size or wheelchair design. A Velcro strap is provided to keep the belt ends up against the vehicle sidewall when not in use.
|
|
|
Part No. FE200599HA
|
HA Patent #5,730,500
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-Retractable Fixed-Point
|
| The FE200710 Fixed-Point Shoulder Belt can be mounted to the existing original equipment shoulder belt location, or with the FE200745 Sidewall Mounting Kit. This is an excellent choice for single, fixed or dedicated position vehicles.
|
|
|
Part No. FE200710
|
52" long
|
|
|
|
|
|
|
Part No. FE200710L
|
82" long
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-Retractable Fixed-Point with Patented Height Adjuster
|
| The FE200710HA Fixed-Point Shoulder Belt can be mounted to the existing original equipment Shoulder Belt location or with the FE200745 Sidewall Mounting Kit. This is an excellent choice for single, fixed or dedicated position vehicles. The simple, easy-to-use Patented Height Adjuster provides nearly 12 inches of vertical adjustment and allows for the proper geometry and placement of the Shoulder Belt, regardless or passenger size or wheelchair design.
|
|
|
Part No. FE200710HA
|
HA Patent #5,730,500
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Shoulder Belts |
|
|
Non-Retractable Fixed-Point Quick Disconnect
|
The FE200865 Quick Disconnect Shoulder Belt can be mounted to the existing original equipment shoulder belt anchor bolt along with the original equipment shoulder belt.
The Quick Disconnect Shoulder Belt can be easily removed, by using the single push-button buckle, to allow a passenger, sitting on the flip seat, to use the original equipment shoulder belt. This belt can then be stored separately.
When a wheelchair is placed in the same area, the Quick Disconnect Shoulder Belt connects to its short anchor strap by using the single push-button buckle. The Quick Disconnect Shoulder Belt then provides the upper body protection for the passenger with special needs.
|
|
|
|
|
|
|
|
|
Retractable Fixed-Point
|
The FE200604 Retractable Fixed-Point Shoulder Belt offers automatic adjustment and is ideal for vehicles with single, fixed or dedicated passenger positions.
The retractor mechanism can be mounted directly to the vehicle floor or sidewall, or into Series L Aluminum Track with the use of two FE200747 Series L mounting Kits. The belt web guide can be installed to the vehicle sidewall by using the FE200745 Sidewall Mounting Kit, or into Series L Aluminum Track with the FE200747 Series L Mounting Kit.
NOTE: For passengers with limited upper body control, a non-retractable shoulder belt is recommended.
|
|
|
Part No. FE200604
|
112" long
|
|
|
|
|
|
|
Part No. FE200604L
|
136" long
|
|
| | | | | | | | | |