Integrated Combination Belts
The Integrated Combination Belt provides a shoulder belt and Integrated Lap Belt that are incorporated into a fully retractable unit. It combines the automatic adjustability of a shoulder belt with the easy installation of an Integrated Lap Belt. The web guide can be mounted directly to vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Retractor can be mounted to vehicle floor or sidewall, or can be converted from fixed-point to track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit.
Integrated Combination Belt
Integrated Combination Belt with triangular fittings to attach lap belt to stud on rear wheelchair tie-down retractor assemblies. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.
The AL700856 is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor.
For use with AL700 Titan Series Systems only |
 |
|
Integrated Combination Belt
Integrated Combination Belt with snap hooks to attach lap belt to D-rings on rear wheelchair tie-down assemblies. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.
The FE200856 is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor. |
 |
|
Integrated Combination Belt with Height Adjuster
Integrated Combination Belt with triangular fittings to attach lap belt to stud on rear wheelchair tie-down retractor assemblies. Height Adjuster provides nearly 12” of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.
The AL700856HA is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor.
For use with AL700 Titan Series Systems only |
 |
|
Integrated Combination Belt with Height Adjuster
Integrated Combination Belt with snap hooks to attach lap belt to D-rings on rear tie-down assemblies. Height Adjuster provides nearly 12” of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.
The FE200856HA is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor. |
 |
|
Dual Retractable Integrated Combination Belts
The Dual Retractable Integrated Combination Belt offers two retractors for easier webbing adjustment. The height of the belt can be adjusted for proper shoulder belt placement on the occupant simply by pushing a release button on the upper retractor. In addition to this feature, this belt can be moved front to back along the vehicle sidewall, without the use of tools, by simply removing the L fittings from the vehicle track.
AL700868-2
|
|
AL700868-4
|
(shown below) |
Dual Retractable Integrated Combination Belt
Dual Retractable Integrated Combination Belt with triangular fittings to attach lap belt to stud on rear wheelchair tie-down retractor assemblies and a flat mounting bracket on the upper retractor.
The AL700868-4 offers an angled mounting bracket on the upper retractor to accommodate angled vehicle sidewall wire molding.
For use with AL700 Titan Series Systems only
 |
 |
|
Dual Retractable Integrated Combination Belt
Dual Retractable Integrated Combination Belt with snap hooks to attach lap belt to D-rings on rear wheelchair tie-down retractor assemblies and a flat mounting bracket on the upper retractor.
The FE200868-4 offers an angled mounting bracket on the upper retractor to accommodate angled vehicle sidewall wire molding. |
 |
|
Catalog Occupant Restraint Section