QC06058
OMNI End Cap for Surface Angled Series L-Track
These L-Track End Caps finish off your flush-mount flange series installation for a professional look.
They feature a tapered edge to minimize snags and catches on the track edge.
 |
QC06059
OMNI End Cap for Surface Angled Series L-Track
With surface mount L-Track, protective end caps allow for a gradual rise at the ends of the track.
The caps reduce the risk of tripping and are less of an obstacle for wheelchairs and other mobility devices.
 |
FE201005
Series L Track Installation Hardware Kit - 1/4” Bolts
This kit provides hardware to install Series L Track into vehicle floor. Bolts are 3” long with automotive grade plating, giving up to 10 times the corrosion resistance of standard zinc plated finishes. A special sealant is applied under the bolt head to provide a seal between the hole in the track and the bolt. The kit comes with 100 bolts, washers and lock nuts.
 |
FE201006
Series L Track Installation Hardware Kit - 5/16” Bolts
This kit provides hardware to install Series L Track into vehicle floor. Bolts are 3” long with automotive grade plating, giving up to 10 times the corrosion resistance of standard zinc plated finishes. A special sealant is applied under the bolt head to provide a seal between the hole in the track and the bolt. The kit comes with 100 bolts, washers and lock nuts.
 |
FE200744
Series L Track Seat Stud Fitting
For use in mounting vehicle seats into Series L Track.
 |
FE200739
Series L Track Double Lug Stud Fitting
This fitting is used as a bolt-on anchoring point for Series L Track applications where higher strength than the FE200744 is required.
 |
FE200751
Plastic Filler Strip
For use with Series L Track only. 25’ per roll.
 |
8663
Series L Track End Cap
For use with FE751-01 Series, FE748-01 Series, FE200765 and FE200763 L Track only.
 |
8730
Series A Track End Cap
For use with FE702-01 Series A Horizontal Track only.
 |
